XFdtd
Kaitlyn Brickley
Transient EM/Circuit Co-Simulation in XFdtd: A ...

This paper introduces XFdtd’s transient EM/circuit co-simulation capability, which combines the strength of 3D full-wave electromagnetic simulation with the flexibility of circuit solvers.

Transient EM/Circuit Co-Simulation in XFdtd: A Closer Look at TVS Diodes for ESD Protection
XFdtd
Admin
Full Wave Matching Circuit Optimization ...

Full wave matching circuit optimization (FW-MCO) is a new technology that combines full wave, 3D EM simulation with circuit optimization into a novel approach for solving an age-old RF problem: determining which component values provide the desired match for a given matching network layout. This article describes the design process using the design of a matching circuit for a GPS-Bluetooth antenna.

Full Wave Matching Circuit Optimization Shortens Design Iterations
XFdtd
Admin
Introduction to FDTD Electromagnetic Simulation ...

Electromagnetic simulation has been used by RF engineers for many years to aid the design of automotive radar sensors, but the increasing demands of advanced driver assistance systems (ADAS) are changing the methods used.  This paper introduces FDTD’s advantages for automotive radar circuit and systems level designers, including simulation of very large problems, more efficient memory requirements, and the ability to reveal sources of coupling.

Introduction to FDTD Electromagnetic Simulation for Automotive Radar
XFdtd
Admin
Benefits of Time-Domain Electromagnetic ...

This whitepaper demonstrates how XFdtd's time-domain approach enables rapid development by allowing engineers to determine the performance of a fully detailed sensor model installed behind a piece of fascia without needing to build prototypes and run tests in an anechoic chamber. The analysis of a 25 GHz sensor frames the discussion.

Benefits of Time-Domain Electromagnetic Simulation for Automotive Radar
Wireless InSite
Admin
Comparison of Indoor Propagation Modeling of ...

This presentation demonstrates how the 3D ray tracing code in Wireless InSite can accurately predict received power coverage even in a multi-room environment containing many walls and different materials types. In order to verify the accuracy of the code, the floor plan of Remcom’s business offices was modeled in the software with a WiFi antenna and a third party tool was used to create a coverage plot of the received power throughout several of the suites.

Comparison of Indoor Propagation Modeling of WiFi Coverage Using Wireless InSite and Measurements

Rotman Lens Designer

, ,

Using EM Simulation for 5G Design E-Book

, ,
Using EM Simulation for 5G Design E-Book

Download examples that demonstrate how EM simulation software solves challenges related to 5G and MIMO. Examples include MIMO and array design, 5G urban small cells, mmWave and beamforming

Rotman Lens Design for Millimeter-Wave Sensor Application

Rotman Lens Design for Millimeter-Wave Sensor Application

This paper demonstrates the design of Rotman lens for ESM sensor application in operation band 32-38 GHz. The initial design is created in Remcom’s Rotman Lens Designer and then verified against experimental measurements. Parameters of the realized prototype are presented and methods of increasing its performance are outlined.

 

Save time and reduce costs.

Contact Remcom today for a customized solution to your most complex electromagnetic challenges.