In this video tutorial, an antenna's intrinsic impedance is simulated for two conditions--in free space and against a head. A three-port switch with two possible states is also included.

In this tutorial, we demonstrate the ease of adjusting, or tuning, multiple operating modes so that capacitance values match various frequency bands. Using XF’s schematic editor with tuning slider bars, the correct values can be found in moments.

This presentation covers XFdtd's capabilities for matching networks, including the schematic editor and frequency domain circuit solver.

In this recording from Remcom's booth at the International Microwave Symposium, Justin Newton discusses how the schematic editor works and its benefits for complex antenna design.

XFdtd’s schematic editor includes matching network tuning, enabling users to easily adjust component values to meet design goals and better understand the behavior of a circuit.

This tutorial demonstrates XFdtd's workflow for evaluating a diplex matched antenna and analyzing two different matching network states simultaneously.

XF’s schematic editor provides engineers with a unique option for analyzing matching networks and corporate feed networks. In this tutorial, we demonstrate XF's workflow for analyzing a simple matching network and applying it to full-wave FDTD results using the schematic editor.

This short video clip demonstrates how Wireless InSite models engineered electromagnetic surfaces (EES) and compares coverage improvement with diffuser and grating EES placements on a glass window or a wall.

Tarun Chawla, Remcom's Director of Business Development, was a guest on the Sciencei Podcast. Tarun discussed the revolutionary technologies in wireless communications that have been developed during the past decades.

Using WaveFarer's included scripts, users can leverage Remcom's XGtd path viewer to generate ray path animations. This clip demonstrates the capability by showing backscatter in an indoor scenario, visualizing how waves diffract through doorways and penetrate walls.

WaveFarer’s diffuse scattering model increases the fidelity of the simulation by revealing how paths interact with rough surfaces, leading to additional clutter in radar returns.

In this presentation, we discuss analyzing and optimizing an aperture coupled 1x4 patch antenna array with a compact, fan-shaped feeding network for operation in 60 GHz band using XFdtd.

In this video tutorial series, we walk through a step-by-step outdoor propagation analysis using Wireless InSite MIMO.

With the expansion of 5G NR for mobile connectivity, industrial and manufacturing applications such as robotics, IOT, and smart factories with automation come into play. Laying out a 5G network in complex and cluttered environments with several conductive surfaces can be challenging. Wireless InSite predicts the coverage and interference and accounts for the multipath in complex environments such as heavy-industrial factories, warehouses, server farms and more.

Penn State University is located in State College, Pennsylvania, a suburban city that contains several LTE sites. This simulation shows the coverage prediction from its existing LTE sites in the downtown area.

A passenger train located in a station is connected to an access point (AP) mounted on the roof of the station. RF propagation paths computed using the shooting-and-bouncing ray technique are shown.

In this video tutorial, we offer a step-by-step guide to perform an indoor propagation analysis in an enterprise environment.

Learn how to use XF's features for ESD testing as we walk through the process of analyzing a multi-layer PCB and identifying potential locations of dielectric breakdown.

In this video Remcom introduces the CDF of EIRP metric for antenna phased array analysis in XFdtd. The example demonstrates a special diversity application using a smartphone.

WaveFarer is a unique software tool created specifically for automotive radar sensor design and placement. It enables Tier 1 suppliers to virtually test and refine results earlier in the design process, improving installed sensor performance.

In this short video from IMS 2018, Remcom's product marketing manager, Jeff Barney, describes the process of simulating the antenna element, modeling the channel propagation, and calculating the throughput modulation.

This demonstration shows how Wireless InSite meets 3GPP and METIS channel modeling requirements for 5G.

Remcom performed a study using Wireless InSite's MIMO capability to generate the complex channel matrices for several mobile devices in an urban scene. We then extracted these results and applied two standard beamforming algorithms (using mathematical analysis tools) to visualize beamforming in motion.

This video gives a demonstration of Full-Wave Antenna Matching Circuit Optimization using XFdtd's Circuit Element Optimizer (CEO). The antenna matching circuit design flow is discussed, including CEO's analysis of a given PCB layout. Predicted S-parameters and optimal component value results for two different frequency bands are also shown.

This video tutorial series helps XFdtd users to create and analyze a broadband antenna.  The series will guide you through XF's antenna design process, with each video highlighting key steps and features.

In this video, a Remcom engineer walks through the steps to set up and tune a Ku Band microstrip lens in Rotman Lens Designer (RLD). Included is a discussion of the various options for exporting the file and importing into XFdtd EM Simulation Software, including the use of a customized script to automatically set up the ports and include the material properties.

This video demonstrates antenna radiation far field pattern results viewing, including 3D view and 2D cutplane plots, in XFdtd.

This video uses several examples to demonstrate XFdtd's various meshing techniques: 2D Cutplane Mesh Views, 3D Mesh Cropping, and XACT Accurate Cell Technology for curved geometries.

This video demonstrates CAD import options in XFdtd, including the import of a PCB in ODB++ and subsequent parameterization and modification of the geometry. We also discuss XF's unique CAD Merge feature, which allows updates to be imported while preserving previous settings and parts.